Washroom systems.
Q. In what finishes are taps and accessories supplied in?
A. The
Marathon range of taps and accessories are in most cases available
in a brushed stainless steel finish and polished chrome. The HT range
is for the main part available in polished chrome although some items
particularly accessories are being added in brushed stainless steel.
NB. "27" at the end of a reference number denotes brushed stainless
steel while "16" denotes polished chrome
The CoolLine range is supplied in brushed stainless steel and polished stainless
steel. ("71" brushed "91" polished)
Q. Is CoolLine still available in the UK?
A. We are
the sole distributor of CoolLine products in this country.
Q. What are the flow rates/water pressure
requirements of your range of taps.
A. We have
flow rate diagrams showing volume of water flow at certain pressures.
Q. What connectors/adaptors are
required for your Pollux/HT traps?
A. The trap
outlet has an external diameter of 32mm and will require a standard universal
straight connector to connect to our imperial pipework. Both McAlpine and
Osma supply these.
Q. Are basins supplied with overflows?
A. Some are
and some are not. The Pollux and Stonetech range of wash basins are normally
without overflow. Please howver check when enquiring/ordering.
Q. Can the Quadro, Stonetech and Konchetta
washbasins be supplied without holes cut out for the mounting of taps?
A Yes they can be supplied with or without
tap hole.
Q. Can tap holes
be mounted on left or right hand side of basins (where applicable)?
A. Yes but please
specify when enquiring/ordering..
|
|
Rondal - cloakroom systems.
Q. In what lengths are the Rondal range of cloakroom systems available?
A. Rondal systems
are made to required lengths. If rails are to be end fixed then they should not
exceed recommended lengths given load implications.
Q. How close are coat hangers and hooks together?
A. We recommend
spacings of 100mm (standard) although to increase capacity hangers and hooks
can be positioned closer together. We would suggest a minimum spacing of 75mm.
Q Are locking systems available?
A. A variety
of locking systems are available with the Rondal system. Please ask for details.
Q. Can systems be numbered?
A. Yes we can
number engrave the hanging rails/shelves etc. and supply issue tags
Q. What metal finishes are available?
A. Typically
in an anodised aluminium finish or powder coated to specific RAL colour as required.
A range of brushed stainless steel rails/systems are available.
Q. What timbers are available?
A. Some systems
particulary hook rails and changing room benches are commonly supplied partly
in timer (eg slats). Our standard timber is beech although other natural woods
are available as required. Alternatively timber can be stained to a specific
finish. Note: Grain/colour of timber as a natural material can vary.
Q. How flexible are the cloakroom systems?
A. Very Flexible - We
produce rails etc to required lengths. Systems also allow us to mix and match - hangers/hooks(single,
double, triple or quadruple)/hat hooks/umbrella racks. Please specify requirements.
Q. Is a support/design service available?
A. We have an
in house design department able to provide CAD drawings showing cloakroom layouts.
All we need is an indication of room dimensions and an idea of the hanging capacity
required and we can put forward a solution/suggestion with CAD drawings.
Q. Are double height systems available?
A. Where space
is tight we can provide double height systems so as to increase hanging/storage
capacity. In situations where space is limited we have a range of "space saving" systems/options. |
